GasAlert MicroClip Multi-Gas detector (explosiemeter)

Specifications GasAlert MicroClip Multi-Gas detector (explosiemeter)
DETECTOR: 1, 2, 3 or 4-gas detector
Auto zero: Yes
Calibration: Automatic
Backlight: Alarm condition (auto) and on demand
Sensor: Plug-in, electrochemical cell (toxic and oxygen); plug-in, catalytic bead (LEL)
User options: Adjustable STEL period (5 to 15 minutes in 1 minute intervals); set calibration span
levels and due date; oxygen auto-calibration at start-up; auto-zero LEL, CO and H2S on
start-up; latching alarms; “SAFE” display function (does not display gas concentrations
unless detector goes into alarm); stealth mode for silent operations; force calibration
when calibration overdue; calibration lockout (calibration must be invoked via IR); force
bump test; bump test reminder; multi-language LCD selection in English, French,
German, Portuguese and Spanish; 0-100% LEL (Lower Explosive Limit) or Methane gas
0-5.0% v/v selectable measurement; alarm setpoint disable (set to zero for off);
Low Alarm acknowledge; calibration due date (1 to 365 days or set to zero for off);
confi dence beep (every 10 seconds when enabled); individual sensor enable/disable
ALARM INDICATORS: Clearly advises alarm levels with visual, audible and vibrating alarms
Visual alarms: Wide-angled fl ashing LED alarm bars
LCD indicates gas present and alarm levels encountered
Audible alarm: 95 dB variable pulsed audible alarm at 12 in. / 30 cm
Vibrator alarm: Pulses warning in gas alarm conditions or for any status alarms
Other: Low battery, over range, multiple gas and missing sensor
ALARM LEVELS: Instantaneous Low Alarm for all gases; instantaneous High Alarm for all gases;
TWA (time weighted average) and STEL (short term exposure limit) for H2S, CO;
OL (over limit alarm)
LCD: Continuous, alphanumeric gas readout and status display advises:
Gases monitored: H2S, CO, O2, combustibles (0-100% LEL or 0-5.0% v/v methane)
Gas concentration: Simultaneous and continuous display of gas concentration(s) present
(in ppm, %LEL or % v/v)
STEL/TWA ppm: Records STEL and TWA exposures and displays on demand
Peak ppm or %: Records and displays peak exposure to gas and displays on demand
Alarm setpoints: Displayed on activation
TESTS:
Full function self-test: Full function self-test audible/visual alarms on activation
Sensor/Battery: Continuous self-test of sensors, battery and circuitry
GENERAL SPECIFICATIONS: Rugged, composite material with integral concussion-proof boot
Operating temperature: -4 to 136 oF / -20 to 58 oC
Temperature code: T4
Humidity: 0% to 95% RH (non-condensing)
EMI/RFI: Complies with EMC Directive 89/336/EEC
Ingress Protection: IP65/67
Battery run-time: 12 hours (typical); recharges in less than 3 hours
Size: 4.2 x 2.4 x 1.1 in. / 10.7 x 6.0 x 2.7 cm
Weight: 5.6 oz. / 160 g
EVENT LOGGING: Records and transmits up to 10 gas alarm events
Event information: Gas type; peak exposure level (ppm or %); alarm duration in minutes and seconds;
serial number; time of event
DATALOGGER: User-downloadable datalogger
Data recorder: All events and occurrences
Sampling rate: Factory set at 15-second intervals
Storage: 16 hours; when full, the wraparound feature replaces oldest data with most recent data
WARRANTY: Full 2 year warranty including all sensors