Browse By
Category
  1. Alarm (9)
  2. Floodlights (0)
  3. Fixed (8)

Special

Grid List

10 of 14 products

per page
Page:
  1. 1
  2. 2
  1. ATEX Zone 0 LED Alarm Flashing Beacon
    The ATEX LED Flashing Beacon Alarm is a zone 0 FM, ATEX & IECEx certified flashing beacon which takes 16-28 VDC from a suitable safety barrier The ATEX LED Flashing Beacon Alarm has six high intensity LEDs and a prismatic lens in choice of fiver colors. The ATEX LED Flashing Beacon Alarm has a double lash at once or twice per second. The ATEX LED Flashing Beacon Alarm has an IP65 ABS flame retardant housing and End-of-line resistor certification. The ATEX LED Flashing Beacon Alarm is the economical solution for industrial fire & gas detection systems.
    Call for price
  2. ATEX Zone 0 LED Flashing Beacon & Alarm Sounder
    The ATEX LED Flashing Beacon and Alarm Sounder is an intrinsically safe FM, ATEX & IECEx certified beacon and alarm sounder. The ATEX LED Flashing Beacon and Alarm Sounder features six high-intensity LEDs and a prismatic lens in choice of five colors. The ATEX LED Flashing Beacon and Alarm Sounder has a double flash at once or twice per second and a loud 100dB(A) audible output. The ATEX Alarm Sounder has a choice of 49 different alarm tone combinations in three different stages and IP6 ABS flame retardant housing and End-of-line resistor certification.
    Call for price
  3. ATEX Zone 0 LED Flashing Beacon
    The ATEX LED Flashing Beacon provides a bright flashing warning signal in various hazardous areas where ambient noise levels may drown out an audible alarm. The ATEX ALARM LED Flashing Beacon has a bright light output with immediately noticable flashes available in five colors to enable multi-stage alarm level protocols. The ATEX LED Flashing Beacon has two double flashes per second and the IP65 environmental rating makes it compatible with a wide range of barriers. Main application of the ATEX Alarm LED Flashing Beacon is to provide a visible warning in a noisy hazardous process area where a sounder is not easily identified. The beacon may be powered from a wide variety of Zener barriers or galvanic isolators and may be controlled by any contact or dc supply in the safe area. It may also be switched in the hazardous area by an intrinsically safe relay or any equipment with an intrinsically safe output such as the alarm output of a BEKA indicator or totaliser.
    Call for price
  4. ATEX Zone 0 LED Stack Lights
    The ATEX LED Stack Lights is an ATEX II 2 G EEx ia IIC T4 certified light tower. The bright LEDs enable this design to be used in hazardous areas with appropriate safety barriers. Up to five lamp segments can be stacked and there are five different colors to choose from. The ATEX Zone 0 LED Stack Lights incorporates a special vibration damper for pole or surface mounting. The ATEX Zone 0 LED Stack Lights uses reliable LED illumination and has 10+ year continuous life expectancy with a low 20mA current consumption and built in vibration shock absorber. The ATEX Zone 0 LED Stack Lights is compatible with a wide range of barriers and doesn't need an explosion proof housing.Each tier of the ATEX Zone 0 LED Stack Lights has a unique prism cut lens and internal reflective cone to improve visibility.
    Call for price
  5. ATEX Zone 0 LED Multiple Alarm Flashing Beacon
    Intrinsically Safe ATEX Alarm Flash Beacon ATEX Certified Ex II 1G, EEx ia IIC T6 Super bright LED in five colours Rugged IP65 corrosion resistant casing with separate terminal compartment Can be used in any zone Single, dual or triple flash Dual colour option Pipe or wall mounting Fully isolated control inputs
  6. ATEX Xenon Bright Flashing Beacon
    Intrinsically Safe Bright 5/10/15 Joule Beacon The ATEX Alarm Flashing Beacon is an explosion proof/ flameproof ATEX Alarm Flashing Beacon with a 5/10/15 joule output. The ATEX Alarm Flashing Beacon has a 1Hz flash cycle and automatic synchronization and optional flip flop mode on multi beacon systems. The ATEX Alarm Flashing Beacon has six different available lens colors and a stainless steel racheting mounting bracket and dome guard. The ATEX Alarm Flashing Beacon is IP66 & IP67 certified and comes with AC and DC supply options
    Call for price
  7. ATEX Xenon Alarm Flashing Beacon 21W
    The ATEX Xenon Alarm 21W Flashing Beacon is a 21 Joule, dual Xenon tube flashing beacon for use in hazardous areas. The ATEX Xenon Alarm 21W Flashing Beacon has a 1Hz single flash, 2Hz alternate flash and 1 Hz double strike flash and remotely selectable 2nd stage patterns. The ATEX Xenon Alarm 21W Flashing Beacon comes with six available lens colors and has a stainless steel racheting mounting bracket and dome guard aswell as IP67 ingress protection.
    Call for price
  8. Explosion Proof Combination Signal - 110 dB (A) / 5 Joule
    - Omnidirectional high output sounder 110 dB (A) / 1 mI
    - IP66 rated as standard
    - Aluminium enclosure with stainless steel fasteners
    - Flash rate 1 per second
    Call for price
  9. ATEX Luminaire ESL 25-Ex 24V - 20W

    Stainless Steel-Lumiglas Luminaire ESL 25-Ex is designed for universal applications, this Ex-type sight glass luminaire has been developed for use in potentially explosive environments. 

  10. ATEX DHF1 STROBE BEACON ZONE 1/2
    ATEX Dhf1 Strobe Beacon Zone 1/2 visual signal device with powerful xenon tube for use in explosion endangered areas of zones 1 and 2 modular system - synthetic housing made of glassfibre reinforced polyester low weight - robust and corrosion proof design flameproof chamber "d" - terminal connection chamber in protection class increased safety "e" for continuous operation models with 5 or 15 J strobe energy 4 lens colours insulation class II - no equipotential bonding required
    Call for price
Grid List

10 of 14 products

per page
Page:
  1. 1
  2. 2