The Ex62 is 14 " explosion proof camera for effective surveillance at high risk environments. The ATEX Ex62 CCTV Camera is designed for hazardous industrial locations including the entire range of OSHA (UL) designations for explosive locations.
The iCAM100's design means that it is suitable for use in Zone 1, 21 and Zone 2, 22 environments, iCAM100 is also suitable for use in harsh environments with its IP65 ingress protection, 316L stainless steel and GRP construction.Connection of iCAM100 to the video monitor or CCTV system is quite simple using either 75 ohm coax or 150 ohm differential signal cable outputs.
Up to 2 megapixel high resolution
Max. resolution 1920 × 1080
4 mm/6 mm/8 mm/12 mm/16 mm lens
The lens type mentioned above is required while ordering.
120dB Wide Dynamic Range
Three video streams
6 behavior analyses, 2 exception detections, 1 recognition
Support on-board storage, up to 128GB
IR range: 30 m
AC 100V to 240V/PoE
Explosion-proof: ATEX: II 2GD Ex db IIC T6 Gb/Ex tb IIIC T85°C Db IP68 IECEx: Ex db IIC T6 Gb/Ex tb IIIC T85°C Db IP68
The Comcam IPQ6045C is an intense ex-evidence vault camera of the exceptionally most recent era with a determination of 2 megapixels (1920 x 1080p). The camera permits ceaseless 360° skillet revolution and 180° tilt scope with programmed picture turn. A specific highlight is the exact and fast panning and tilting capacity of the camera which does not just discard a 30-crease optical zoom however has additionally a 12-overlay computerized zoom.
ATEX Thermal CAMERAS
SeSys have added to their scope of ATEX/IECEx scope of confirmed cameras another warm model.
Inside a 316 stainless steel lodging, the camera has effective examination to screen development and in addition a temperature touchy choice that can be utilized to trigger a caution in light of the temperature of a region of intrigue.
Especially suited to edge checking and resource administration,
the ensured warm cameras bolster early cautioning alerts being raised for an extensive variety of uses.
Blast Proof Series.pngContinuing their objective to create and dispatch reconnaissance items that satisfy clients' extraordinary applications needs, Hikvision's most recent blast verification cameras use 304 and 316L stainless steel lodgings for greatest erosion and blast resistance, and are IP68 water/clean entrance appraised.