AR-021 EX MOTION SENSOR
*Price may change due to echange rate.
AR-021 EX MOTION SENSOR
The new ARTIDOR movement sensor depends on the most recent high successive radar innovation and hence equipped for distinguishing even the smallest developments. On account of the wide opening point and its 8 m edge of scope, no development can get away from this current sensor. Indeed, even through entryways, sheets of glass or thin dividers, developments will be distinguished; the reaction might be restricted by the settings utilized by the client. The sensor gadgets offer an electrical yield of up to 2,000 VA ohmic or light inductive load and an additional free contact. The wise, chip based sensor innovation, for example, switches the light ON and OFF again after the preset time. This is to a great degree helpful, as well as builds security and is vitality and cost sparing. The movement sensor can effectively be connected in patios, flow zones, staircases, storerooms, frosty storage spaces en business ranges in which great perceivability is imperative. The movement sensor meets the most recent blast security necessities and can be connected in an extensive variety of areas with conceivably hazardous environment thus of gas or clean. The movement sensor is along these lines appropriate for use at oil and gas generation destinations and in the substance and petrochemical enterprises. The ARTIDOR movement sensor has a CE stamping and is guaranteed as per European Directive 2014/34/EU (ATEX 114) for use in areas with a danger of blast.
[Technical data]
Explosion safety: | ATEX II 3 G Ex nR IIC T6 Gc, II 3 D Ex tc IIIC T80°C Dc |
Applicable EU directives: | 2014/34/EU (ATEX 114) and 2014/30/EU (EMC) |
CE conformity: | EN 60079-0:2012 / A11:2013, EN 60079-15:2010, EN 60079-31:2009 |
Sensor: | 5.8 GHz radar currents, 1mW transmission capacity |
Angle of coverage: | 1 - 8 m, adjustable |
Registration angle: | 360° with 140° opening angle |
Dimmer switch: | 2 - 2,000 lux |
Preset time: | 10 seconds - 30 minutes |
Voltages: | 230 V AC 50 Hz (L, N1, PE) |
Switch power AC1: | 2,000 VA (ohmic and light inductive loads) |
Switch power AC15: | 400 VA at 230 V AC (electromagnetic load with tenfold engagement power) |
Motor load AC3: | 0.3 kW at 230 V AC (stopping and starting of squirrel-cage armature motors) |
Output: | Switched 230 V AC supply (L', N2) and free contact (1, 2) |
Electrical connection: | Fastening clamps 7 x 2.5 mm² |
Material: | Die cast aluminum housing, RAL 7032, silver gray, polyamide frame with impact resistant safety glass, cable glands nickel plated brass |
Entries: | M16 cable gland (2x) suitable for cables from 5 - 9 mm in diameter |
Ingress protection level: | IP66 according to EN 60529 |
Mounting bracket: | Black stainless steel mounting bracket, mounting holes Ø7 (4x), mutual distance 81 x 88 mm |
Ambient temperature: | -20 °C to +50 °C |
Dimensions housing (L x W x H): | 160 x 80 x 73 mm |
Weight: | 1,670 grams (including mounting bracket) |
*Prices as shown on this store are indicational and subject to 21% tax,
currency changes and shipping costs. For an accurate and special price please call or e-mail our support.