ATEX Triple Polarised Antenna for Hazardous Areas

Call for Price
SKU
atex_id_747

ATEX Triple Polarised Antenna for Hazardous Areas

  • Suitable for Groups II, III
  • IP67
  • -40°C to +65°C
  • Simple Apparatus
The iANT220 is a rugged antenna for use in hazardous areas, which is classed as simple apparatus as defined in the international area intrinsic safety standards.
 
It is suitable for either indoor or outdoor use, and optimised for use in WLAN installations in the 2.4GHz spectrum for IEEE802.11 b/g/n/ac wireless networks. The iANT220 combines two vertical / cross polarised antennas in one package, allowing the latest enterprise class MIMO wireless hardware to be installed with just one antenna.
 
Please Note: The iANT2xx range of antennas is classed as "Simple Apparatus" under international intrinsic safety standards. IEC 60079-25 requires that simple apparatus equipment used in an intrinsically safe electrical system is compliant with IEC 60079-0, IEC 60079-11, IEC 60079-14 & IEC 60079-25. Extronics has assessed the iANT2xx antenna range together with our intrinsically safe certified wireless products to provide solutions compliant to all relevant standards. Therefore iANT2xx antennas can be deployed in a hazardous area, as part of an Extronics system, without the need to undergo further assessment. Compliance is also maintained if an iANT2xx antenna is used with the Extronics iSOLATE500 RF galvanic isolator. If the antenna is not to be used with Extronics' products, then the system designer must assess the hazard and demonstrate compliance to the relevant standards
 

 

DOWNLOADS

 Coming Soon..

 

 

*Prices as shown on this store are indicational and subject to 21% tax, currency changes and shipping costs. For an accurate and special price please call or e-mail our support..
 

ATEX Triple Polarised Antenna for Hazardous Areas

  • Suitable for Groups II, III
  • IP67
  • -40°C to +65°C
  • Simple Apparatus
The iANT220 is a rugged antenna for use in hazardous areas, which is classed as simple apparatus as defined in the international area intrinsic safety standards.
 
It is suitable for either indoor or outdoor use, and optimised for use in WLAN installations in the 2.4GHz spectrum for IEEE802.11 b/g/n/ac wireless networks. The iANT220 combines two vertical / cross polarised antennas in one package, allowing the latest enterprise class MIMO wireless hardware to be installed with just one antenna.
 
Please Note: The iANT2xx range of antennas is classed as "Simple Apparatus" under international intrinsic safety standards. IEC 60079-25 requires that simple apparatus equipment used in an intrinsically safe electrical system is compliant with IEC 60079-0, IEC 60079-11, IEC 60079-14 & IEC 60079-25. Extronics has assessed the iANT2xx antenna range together with our intrinsically safe certified wireless products to provide solutions compliant to all relevant standards. Therefore iANT2xx antennas can be deployed in a hazardous area, as part of an Extronics system, without the need to undergo further assessment. Compliance is also maintained if an iANT2xx antenna is used with the Extronics iSOLATE500 RF galvanic isolator. If the antenna is not to be used with Extronics' products, then the system designer must assess the hazard and demonstrate compliance to the relevant standards
 

 

DOWNLOADS

 Coming Soon..

 

 

*Prices as shown on this store are indicational and subject to 21% tax, currency changes and shipping costs. For an accurate and special price please call or e-mail our support..
 
Write Your Own Review
You're reviewing:ATEX Triple Polarised Antenna for Hazardous Areas