ZAB1-M4 MULTI- COLOUR FLASHING BEACON - Zone 1

Call for Price
*Price may change due to echange rate.
SKU
42326224

The Ziztel ZAB1-M4 is a rugged explosion proof electronic flashing beacon which employs xenon light sources to selectively produce brilliant pulses of visible coloured light.

ZAB1-M4 MULTI- COLOUR FLASHING BEACON - Zone 1 

The Ziztel ZAB1-M4 is a rugged explosion proof electronic flashing beacon which employs xenon light sources to selectively produce brilliant pulses of visible coloured light. The unit is specified for safety applications where acoustic alarms are ineffective due to excessive ambient noise and provides effective high performance visual warning annunciation. ZAB1 – M4 can be specified for use on safety critical applications as part of a PAGA Public address and Alarm System. ZAB1-M4 is designed for reliable service on both land based and marine / offshore installations. The ZAB1-M4 beacon can be equipped with up to four different colour sources within the single housing realising major cost savings over conventional discrete multiple beacon arrays. IMO SOLAS colour set is available i.e. Red – Yellow – Amber White or Green (note it is possible to segment two colours e.g. Green / White if required). Colour is assigned by specially designed Fresnel optical lens which provides highly efficient light dispersion. The unit is capable of initiating colour selection by a three pair control cable which also includes mains power supply or ZAB-M4-A can be specified allowing energisation and control over a single pair of field cable conductors. The maximum number of devices on a single circuit is dependent on the cross sectional area of the field cable conductors and maximum volt drop tolerance, we advise no more than forty units on a single circuit in any case to improve security. The unit utilises a totally corrosion proof stainless steel construction which minimises routine service and ensures low through life maintenance cycles.

ADVANTAGES

  • Totally corrosion proof all stainless steel construction – long through life, minimal maintenance.
  • Optional colour selection over 1 x pair cable – major cost saving over conventional multi core based systems.
  • No moving parts - microprocessor controlled.
  • Multiple light sources – Duplicated xenon discharge tube sets for each colour.
  • Zone 1 ATEX and IECEx certified - safe for use in hazardous areas.


TECHNICAL SPECIFICATIONS

Light Source: High intensity Xenon tube
Security:

Twin tubes for each colour – total eight xenon discharge tubes

Supply Voltage Options:

110 /120- 220 /240 VAC 50 / 60 Hz / 270 VAC 50 / 60 Hz

24 V DC to 48 VDC

Tolerance: +10% / -15%
Consumption: 30Watts/VA (60Watts/VA peak)
Initiation: 5 x field conductors (three pair cable)
Initiation suffix ‘A’ type: 2 x field conductors (single pair cable)
Flash rate: 1 Hz
Duty cycle:

Continuous

Flash energy:

21 Joules / colour set

Temperature Range:

-60 ̊C - +70 ̊C

IP Rating:

IP66 / 68

Weight: 4.5Kg Ex d, 6Kg Ex de
Dimensions Exd variant: 170mm wide x 337mm high
Dimensions Exe variant: 170mm wide x 405mm high
Gland entry:

2 x 20 mm isometric cable gland entries

Mounting attitude: Vertical well glass up, vertical well glass down or horizontal
Enclosure material: Corrosion proof 316g stainless steel
Enclosure colour: Natural

Colour selection - maximum 4
colours (except IMO SOLAS
possible 5 colours):

Red, Yellow, Green, Blue, White, Amber, split White / Green

Maximum cable termination
cross sectional area:

2.5 mm CSA / conductor
Location: Hazardous area Zone 1 IIC T4
Certification: IECEx and ATEX certified

 

DOWNLOADS

Datasheet.pdf

 

For orders under € 450 we charge € 25 order costs.
Prices shown on this website are before taxes, currency changes and shipping costs.
For an accurate price please contact our sales team at info@comm-co.com

Write Your Own Review
You're reviewing:ZAB1-M4 MULTI- COLOUR FLASHING BEACON - Zone 1