XCZ1 Mini 5 Kit (Zone 1 iPad Mini 5)
€4,138.53
*Prices are Excl. VAT, duty and shipping costs and may change due to exchange rate.
*Prices are Excl. VAT, duty and shipping costs and may change due to exchange rate.
SKU
42326250
XCZ1 Mini 5 Kit (Zone 1 iPad Mini 5)
You'll be able to use the Apple iPad mini 5 in a Zone 1 area with explosive gas atmospheres and have all the accessories at your disposal. The XCZ1 is a flameproof enclosure (Ex db), not an intrinsically safe device.
Specifications
| Product | Hard anodised aluminium with sapphire glass window |
| Size | 9.5″ (241 mm) x 6.75″ (171 mm) x 0.6″ (15 mm), according to the Xciel datasheet |
| Weight | 2.45 lb (1.1 kg), includes XCZ1 and iPad |
| Temperature | -20 °C to +45 °C (ambient) |
| Sealing | IP54 |
The XCZ1 mini kit includes:
The XCZ1 mini (case only)
Hardened carrying case
Locking system
Stylus
Nylon case
XCZ1 X Strap
iPad specifications:
- Dimensions: 203.2 x 134.8 x 6.1 mm
- Weight: 300.5 g
- Operating system: iOS 12.1.3 up to 13.1.2
- Screen size: 7.9"
- Resolution: 1536 x 2048
- CPU: Apple A12
- RAM: 3 GB
- Storage: 64/256 GB
- Battery: 5,124 mAh
- Rear camera: 8 MP
- Front camera: 7 MP
- Communication: Wi-Fi / 3G / LTE
- eSIM available
Note: Xciel states that the iPad mini 5 is now only available as a Wi-Fi model; cellular versions are no longer available.
Certification
The XCZ1 mini 5 enclosure is certified under the IECEx scheme as a flameproof enclosure. The protection concept is Ex db (flameproof enclosure "d"), not intrinsic safety. The marking covers explosive gas atmospheres only.
| IECEx certificate | IECEx EXV 19.0026X, issue 2 (22 June 2023), issued by ExVeritas Limited, United Kingdom |
| IECEx marking | Ex db IIC T5 Gb (-20 °C < Tamb < +45 °C) |
| Type of protection | Flameproof enclosure "d", level of protection db |
| Standards | IEC 60079-0:2017 (Ed. 7.0), IEC 60079-1:2014 (Ed. 7.0) |
| Certified equipment | Flameproof iPad Mini, model numbers XCZ1 Mini followed by 4 or 5, optionally followed by -WOC (metal tabs covering the front and rear cameras) or -NIC (metal tabs, camera modules removed) |
| Zones | Zone 1 and Zone 2, explosive gas atmospheres only. Gas group IIC (also covers IIA and IIB), temperature class T5. No dust marking, so not for Zone 21 or Zone 22. Not for Zone 0. |
| Ambient temperature | -20 °C to +45 °C |
| ATEX | ATEX documentation on request |
| Manufacturer | Xciel Inc., Richmond, Texas, United States |
Specific conditions of use (X)
The certificate number carries the suffix X. IECEx EXV 19.0026X states the following specific conditions of use:
- The iPad mini shall not be removed from the aluminium case.
- The iPad mini shall not be charged when hazardous atmospheres are present.
- Resellers and end users are not allowed to repair the flameproof joints. Xciel Inc. is not allowed to repair the flameproof joints either.
- The cover bolts should not be removed. They may only be replaced with identical bolts: A2 stainless steel M5 x 0.8 x 8 mm, Torx head (or pan head if a Torx head is not available), tensile strength at least 500 MPa, installed with a torque of 5.9 N·m.
- After recharging the iPad mini, inspect the threads of the power plug and the female threads before re-installation. Install the power plug with all threads fully engaged and tighten the set screw with the tool provided. Check that the set screw sits in the groove of the power plug head (M4 x 0.70 mm A2-70 6H stainless steel cup point hexagon socket set screw).
- Rubber bumpers must be installed on the equipment at all times to protect the corners of the aluminium case, and must be visually inspected for good condition before each use.
Documentation
Write Your Own Review