FLIR A310Ex ATEX Industrial Automation Thermal Camera w/ Lens Choice
Call for Price
*Prices are Excl. VAT, duty and shipping costs and may change due to exchange rate.
*Prices are Excl. VAT, duty and shipping costs and may change due to exchange rate.
SKU
42326288
This product is EOL (End Of Life).
This product is EOL (End Of Life).
Description
Note: this product is available with your selection of thermal lens. Choose an option using the dropdown box above.
The FLIR A310Ex is a fixed-mount, constant monitoring thermal camera for use within potentially hazardous (explosive) environments.
ATEX certified, this camera produces high quality images and thermal video which can be relayed directly to a control point and viewed back. Integrated alarms and multiple measurement functions are also included for full control over your thermal images and to allow you to react quickly to incident.
The A310Ex can be used in a wide variety of applications; in the example below, it's used to detect thermal hot spots forming in a pile of wood chips which - if left untreated - could cause a fire.
No matter what application you're working in, the FLIR A310ex is suitable for the job.
About the FLIR A310Ex's ATEX Certification
This thermal camera has the following ATEX verification certificate:
ZELM 12 ATEX 0485 X - can be installed in classification zones 1, 2, 21 and 22.
This certification applies to the whole system, including the enclosure and all internal components (thermal camera, heater and integrated controller).
FLIR A310ex Thermal Camera Key Features
- Constantly monitor an area to detect heat issues such as fires and machinery failures
- ATEX compliant for use in hazardous explosive zones
- Thermal imaging camera, controller and enclosure are all ATEX certified, ensuring explosion transmission can never occur
- Suitable for classification zones 1, 2, 21 and 22
- IP67 rated - suitable for use within dusty environments
- Fixed mount - install anywhere and point at a specific area
- Integrated controller with several digital I/O channels and remote control via Modbus TCP/IP or integrated web interfaces
- Two fiber optic and two ethernet controller parts for flexible network integration in star or ring topologies
- Integrated heater - controllable via remote control and ensures fogging/freezing of the window doesn't occur
- Thermal resolution of 320 x 240 pixels produces excellent quality images
- High thermal sensitivity to pinpoint small temperature differences (50mK)
- Automatically determines what lens is equipped to the camera
- Automatic or manual focusing with built-in motor
- 1-8x continuous digital zoom with interpolating zooming on images
- Temperature measurement range from -20 to +120°C (-4 to 248°F) and 0 to +350°C (+32 to +662°F)
- Temperature measurement accuracy of ±2°C
- Integrated spotmeter function
- Area function with 10 boxes showing MAX/MIN/AVERAGE temperature plus position
- Isotherm function with above/below/interval
- Measurement options - send via ftp or email
- Difference temperature function - calculates the delta temperature between measurement functions or reference temperature
- Automatic atmospheric transmission correction
- Automatic optic transmission correction
- Variable emissivity from 0.01 to 1.0 to cater for different surface types
- 6 automatic alarms on any selected measurement function
- Several alarm output options - digital out, log, store image, file sending (ftp), email (SMTP) and notification
- Multiple selectable colour palettes (Black/white, black/white inverted, Iron and Rain)
- Built-in memory for image storage
What's Included?
- FLIR A310Ex Thermal Camera
- Your Choice of Lens
- Cardboard Box
- Printed Documentation
- User Documentatin CD-ROM
- Utility CD-ROM
FLIR A310Ex Technical Specifications
| General Specifications | |
| Ambient Operating Temperature Range | -20 to +40°C (-4 to 104°F) |
| Protection Class | IP67 |
| Weight | 6.7kg (without camera and lens) |
| Empty Volume | 5.06 I |
| External Dimensions (without Sun Shield) | D = 170mm, L = 408mm |
| Housing Material / Surface | Nickel-plated aluminium / Powder coated |
| Protection Window | Germanium, double-sided AR coated, externally with additional hard-carbon layer |
| Maximum Power of Additional Heater | 16W |
| Operating Voltage | 24V DC |
| Maximum Electrical Connection Power | 60W |
| Power Cable/Power Cable Configuration | Helukabel 37264/Pigtail |
| Length of Power Cable | 4m (13ft) |
| Integrated Controller | 4-port switch with 2 x fiber-optic LC 100 Base-Fx or 2 x RJ45 (10/100 up-links) Ring topology support for reduced cabling effort 2 x internal temperature sensors Air humidity and pressure sensor Digital output module controllable via Modbus TCP/IP or web interface to enable turning heater on/off |
| Ethernet Medium | Multi-mode breakout fibe AT-V (ZN) Y (ZN) Y 4G50/125 OM2 |
| Length of Ethernet Cable | 4m (13ft) |
| Ethernet Configuration | Pigtail with FC Connector |
| Explosion Protection | |
| EX Zone Suitability | 1, 2, 21 and 22 |
| Ignition Protection Category | Flame-proof enclosure "d" |
| Maximum Surface Temperature (According to Temperature Class T6) | Maximum 85°C |
| ATEX Certification (Version -AXC) | Ex-Protection Gas: II 2G Ex d IIC T6 Gb Ex-Protection Dust: II 2D Ex tb IIC T85° Db |
| Verification Certificate | ZELM 12 ATEX 0485 X |
| Imaging and Optical Data | |
| IR Resolution | 320 x 240 pixels |
| Thermal Sensitivity/NETD | <0.05°C@+30°C (+86°F) / 50mK |
| Minimum Focus Distance | 0.4m (1.31ft) |
| Spatial Resolution (IFOV) | 1.36mrad with 25° lens or 2.59mrad with 45° lens |
| Lens Identification | Automatic |
| F-Number | 1.3 |
| Image Frequency | 30Hz |
| Focus | Automatic or manual (built-in motor) |
| Zoom | 1-8x continuous, digital, interpolating zooming on images |
| Detector Data | |
| Detector Type | Focal plane array (FPA) uncooled microbolometer |
| Spectral Range | 7.5 to 13μm |
| Detector Pitch | 25μm |
| Detector Time Constant | Typical 12ms |
| Measurement | |
| Object Temperature Range | -20 to +120°C (-4 to +248°F) 0 to +350°C (+32 to +662°F) |
| Accuracy | ±2°C (±3.6°F) or ±2% of reading |
| Measurement Analysis | |
| Spotmeter | 10 |
| Area | 10 boxes with max/min/average temperature, plus position |
| Isotherm | 1 with above/below/interval |
| Measurement Option | Measurement mask filter schedule response: file sending (FTP), email (SMTP) |
| Difference Temperature | Delta temperature between measurement functions or reference temperature |
| Reference Temperature | Manually set or captured from any measurement function |
| Atmospheric Transmission Correction | Automatic, based on inputs for distance, atmospheric temperature and relative humidity |
| Optics Transmission Correction | Automatic, based on signals from internal sensors |
| Emissivity Correction | Variable from 0.01 to 1.0 |
| Reflected Apparent Temperature Correction | Automatic, based on input of reflected temperature |
| External Optics/Windows Correction | Automatic, based on input of optics/window transmission and temperature |
| Measurement Corrections | Global and invidiual object parameters |
| Alarm | |
| Alarm Functions | 6 automatic alarms on any selected measurement function, Digital In, Camera temperature, timer |
| Alarm Output | Digital Out, log, store image, file sending (ftp), email (SMTP), notification |
| Setup | |
| Colour Palettes | Black/white, black/white inverted, Iron and Rain |
| Setup Commands | Date/time, temperature °C or °F |
| Image Storage | |
| Storage Media | Built-in memory |
| File Formats | Standard JPEG, 16-bit measurement data included |
| Ethernet | |
| Ethernet | Control, result and image |
| Ethernet Type/Standard | 100Mbps/IEE 802.3 |
| Configuration | Pigtail with FC connector (fiber) |
| Communication | TCP/IP socket-based FLIR proprietary |
| Video Streaming | MPEG-4, ISO/IEC 14496-1 MPEG-4 ASP@L5 |
| Image Streaming | 16 bit 320 x 240 pixels @ 7.8Hz Radiometric |
| Protocols | Ethernet/Ip, Modbus TCP, TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP |
Downloads
FLIR A310Ex ATEX Industrial Automation Thermal Camera w/ Lens Choice
For orders under € 450 we charge € 25 order costs.
Prices shown on this website are before taxes, currency changes and shipping costs.
For an accurate price please contact our sales team at info@comm-co.com
| Discontinued | Yes |
|---|
Write Your Own Review