Watteco Pulse SENS’O AtEx zone 1
*Price may change due to echange rate.
Description
The Pulse Sens'O AtEx zone 1 remotely reads measurement data from water, gas, electricity or heat meters in AtEx zone 1 sensitive areas. With Pulse Sens'O you can have all your mechanical pressure switches communicate with each other in AtEx zone 1 explosive atmospheres. It transforms existing meters into communicating meters via a public or private LoRaWAN® network.
Watteco Pulse SENS’O AtEx zone 1
Battery
The Pulse Sens'O AtEx Zone 1 device is a LoRaWAN class A sensor that uses a disposable LS17500 3.6V A-type battery as power supply.
USE ONLY SAFT TYPE LS17500 BATTERIES.
The Pulse Sens'O AtEx Zone 1 device incorporates 3 digital inputs, and also includes an internal antenna.
The level or a counter can be transferred to the different inputs. It is also possible to get the voltage of the power supply.
Atex
Installation, maintenance and use must only be carried out by personnel who are competent in the use of electrical equipment in explosive atmospheres as defined in EN 60079-14. Any repair or modification is strictly prohibited without the written permission of Nke Watteco. Risk of electrostatic discharge: The user must implement any action to control the risks of electrostatic discharge, especially by cleaning the product only with a damp cloth.
Characteristics
- LoRaWAN®, Class A
- Easy to install and use
- 3 pulse inputs or status reports
- SAFT LS17500 Lithium battery on holder
- Differential data compression
- IP55 or IP68
- 10 years of autonomy (data compression mode)