ZCAM6 WEATHERPROOF THERMAL IMAGING CAMERA - NON HAZARDOUS AREAS
*Price may change due to echange rate.
The ZCAM6-TI range of CCTV Thermal Imaging cameras developed for use in non-hazardous areas in all offshore, onshore and marine environments. These cameras are constructed entirely from AISI 316L stainless steel for low maintenance and protection from corrosion, small in appearance, lightweight and designed for easy installation and maintenance.
ZCAM6 WEATHERPROOF THERMAL IMAGING CAMERA - NON HAZARDOUS AREAS 
ZIZCAM moves forward the Oil & Gas Petrochemical CCTV market with a new and exciting product range. The ZCAM6-TI range of CCTV Thermal Imaging cameras developed for use in non-hazardous areas in all offshore, onshore and marine environments. These cameras are constructed entirely from AISI 316L stainless steel for low maintenance and protection from corrosion, small in appearance, lightweight and designed for easy installation and maintenance. Certified to IP66 and IP68 for weatherproof and dust proof environments, the ZCAM6 range provides for all requirements of low light and zero safety and surveillance monitoring for non-hazardous areas.
ADVANTAGES
- Single Thermal Imaging Camera option
- Standard or High Definition visual camera option for dual imager
- Fixed focal length or motorised zoom lens options
- Optional integral window wiper mechanism
- All AISI 316L Stainless Steel construction
- Integral interfaces for Fibre or Ethernet
TECHNICAL SPECIFICATIONS
| Construction: | Stainless Steel AISI 316L, |
| Supply Voltage: |
24 Volt DC 50/60Hz, (Optional factory fitted 110/220VAC PSU/transformer) |
| Power Consumption: | 32 Watts max, 50 Watts for -60°C operation |
|
Cable Entries: |
2 x M20 or M25 gland direct entry |
| Weight: | 5.5 to 7.5Kg depending on model |
| Mounting: | Swivel joint for pole top or wall mount bracket |
| Operating Temperature: |
-20°C to +60°C standard (-40°C & -60°C option on request) -20°C to +70°C with optional cooling kit |
| Ingress Protection: | IP66 & IP68 |
| Lens Control: | Sony Visca for Zoom Module Cameras |
| Communication: | RS422/RS485, as standard |
| Protocols: |
Pelco P or D as standard, or to customer specification |
| Auxiliary Relays: | 2 x 24VDC relays for wash wipe |
| Imager: | Uncooled VOx Microbolometer, PAL/NTSC Composite Video |
| Spectral Range: | 7.5 to 13.5μm, Long wave infra red (LWIR) |
| Resolution: | 324 x 256 pixels 640 x 512 pixels |
| Lens options |
50mm 9.1° HFOV (standard), 50mm 12.4° HFOV (standard), |
| Digital Zoom: |
2x, 4x and continuous |
| Imager: |
1/4" EXview HAD CCD, PAL/ NTSC, WDR, Day Night, Auto IR Cut filter |
| Resolution: | 550 TV Lines, Wide Dynamic Range (WDR) |
| Zoom Lens: | 36x Optical, f=3.4 to 122.4mm, Autofocus |
| Day/Night Colour/Mono : | Auto/manual ICR, IR Cut filter removal mode. |
| Colour Sensitivity : | 1.4Lux 1/50sec, 0.1Lux 1/3sec |
| B/W sensitivity: | 0.01Lux Mono 1/3sec |
DOWNLOADS
Datasheet.pdf
For orders under € 450 we charge € 25 order costs.
Prices shown on this website are before taxes, currency changes and shipping costs.
For an accurate price please contact our sales team at info@comm-co.com